The Berto IOT Light driver allows connection of IOT Light and Relay devices. Messaging to and from the device is managed by the Berto IOT Gateway. If the device has a custom webview user interface then this can be connected to a Berto WebView driver, from connections, which provides a UI button that can be used to access the webview from a T3 touchscreen.
The Berto IOT Gateway needs to be installed in your project.
Properties
- Device - The selected IOT device to be used by the driver.
- Address - IP Address of device.
- Model - Model of device.
- Manufacturer - Manufacturer of device.
- MAC Address - MAC Address device.
- Firmware - Firmware version installed on the device.
- Channel - Light or relay channel used for multi channel devices.
- State - Current light state.
- Input 1-8 - Current state of input switch.
Release Notes
v1.00 - 2020-03-15
v1.10 - 2020-03-29
- Auto Update changed to be managed via the Auto Update Time specificed in the Berto Cloud driver.
v1.11 - 2020-04-17
- Added Console option to Debug Mode property to allow for external logging output.
v1.12 - 2020-06-05
- Removed support for dimming and added to IOT Dimmer driver.
- Added Berto WebView support.
v1.13 - 2020-09-22
- Added support for keypad button mappings to turn lights on, off and toggle.
- Added Signal Strength property and variable for Wireless devices.
v1.14 - 2021-01-14
- Added support for IP address change.
v1.15 - 2021-01-27
- Fixed issue with firmware property not be populated.
Licence
DM