The Berto IOT Dimmer driver allows connection of IOT Color and Dimmer devices. Messaging to and from the device is managed by the Berto IOT Gateway. If the device has a custom webview user interface then this can be connected to a Berto WebView driver, from connections, which provides a UI button that can be used to access the webview from a T3 touchscreen.
The Berto IOT Gateway needs to be installed in your project.
Properties
- Device - The selected IOT device to be used by the driver.
- Address - IP Address of device.
- Model - Model of device.
- Manufacturer - Manufacturer of device.
- MAC Address - MAC Address device.
- Firmware - Firmware version installed on the device.
- Channel - Light channel used for multi channel devices.
- Level - Current light level.
- Red - Current Red level (Color lights only).
- Green - Current Red level (Color lights only).
- Blue - Current Red level (Color lights only).
- White - Current Red level (Color lights only).
- Hue - Current hue level (Color lights only).
- Saturation - Current saturation level (Color lights only).
- Temperature - Current temperature level (Color lights only).
- Effect - Current special light effect (Color lights only).
- Input 1-8 - Current state of input switch.
Release Notes
v1.00 - 2020-06-05
v1.10 - 2020-09-22
- Added support for keypad button mappings to turn lights on, off, toggle and hold for dimming.
- Added Signal Strength property and variable for Wireless devices.
v1.11 - 2021-01-27
- Fixed issue with firmware property not be populated.
v1.12 - 2021-08-06
- Fixed issue advanced lighting scene not updating.
Licence
DM